Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everybody,Somebody knows why this is:Router#sh clock12:05:52.076 CDT Wed Oct 5 2011Router#conf tEnter configuration commands, one per line. End with CNTL/Z.Router(config)#exitRouter#Oct 5 17:05:55.464: %SYS-5-CONFIG_I: Configured from console by...
Que tal Estimados,Saben porqué cuando se genera un log en un ruteador éste aparece con una hora diferente a la que tiene localmente configurada, ejemploRouter#sh clock12:05:52.076 CDT Wed Oct 5 2011Router#conf tEnter configuration commands, one per l...
Alguien sabe por qué me marca lo siguiente:Router(config-if)#int s0/0/0Router(config-if)#service-policy out QoS_2048_OUTInsufficient bandwidth 1984 kbps for the bandwidth guarantee (512)Router(config-if)#Oct 5 14:44:02.548: Interface Serial0/0/0 max...
I try to get an IP address for the interface this card generates (interface Cellular 0/3/0) I already did basic configuration for it but nothing happens. Doing "show ip interface brief" the interface is up in status and up in protocol and doing "show...
I'm using IP SLAs on a local router to track some interfaces on other routers but the status of the tracking state whenany monitored interface goes down (while testing) it never comes up because static routes pointing to these routers are tracked too...
correcto, la puse en la comunidad en inglés y en español por que no sé cual es más rápido. Muchas gracias por tu respuesta ya que fue la solución a mi detalle!!Un excelente día para tí también!Saludos,Marco.
Hi, I'm using that same modem string wich is "ATDT*98*2#" and I still don't know why this doesn't work, sorry. As soon I find out the way this works I will publish it.
