Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have configured WIFI SSID for mobility device to connect network. (ex:iphone,android phone, pad etc...)And we use notebook connect to SSID, and check WIFI roaming status, it always only one maybe two times by Ping.But when we try to user Android...
My customer have a machine , it need to send broadcast UDP data to other wireless client.In Cisco wireless environment, this machine send the broadcast UDP data, but other wireless client do not receive the broadcast UDP data.Is there have any way t...
Hi Sirs:I configured 3850 AAA command, but it could not connect to tacas server.Do I confiure something worng?=====================Tacas server status==================Tacacs+ Server - public : Server address: 10.0.0.1 Serv...
Hi sir:The LMS send mail alert to me , and the event is CPU High Utilization.But the Current Utilization vaule is wrong.How can I correct this problem?EVENT ID = 000M51T TIME = Thu 06-Feb-2014 08:00:04 CST STATUS ...
Hi sir:I have install ESXi 5.1 in UCS C240 with VIC 1225.I have confured the ESXi5.1 with VM-FEX standard mode.How can I change it to performance mode ?
I have deployed PI 3.1 VM, and I could not run the commad " root_enable".
This is a right way to get root permition for me.
Then, I could install vmware tools .
Thanks a lot.
Hi sir:The cpu utilization value should be between 1 to 100.According to the message, the htreshold is 90% , but LMS detect the CurrentUtilization=3198607.
