Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Jabber crashes after changing networks either via different SSIDs or going from wireless to wired. After changing networks, checking the windows task manager, Jabber starts climbing up in memory usage then eventually crashes. Anyone have any sugge...
Dialing certain numbers on our Cisco phones gets stuck at "connecting". Sometimes it drops after a few seconds, and sometimes it gets stuck there until you press the end key. RTM doesn't even show that the call was placed.We are running CUCM 9.1 (p...
Is it possible to enable call forwarding from your voicemail menu?Scenario: Call voicemail > enter ext./password > menu "5" forward calls > enter number to forward calls to.Thanks.
We have a VCS/VCS expressway/TMS already up and running. Now we want to integrate a MCU and our goal is to integrate Webex/Onetouch 2.0. What would be the best way to integrate our MCU with our current setup?
We've tried waiting for 30+ seconds and it stays on "connecting". We would dial another number with the same (area code) and same first 3 digits and it would dial within a second.
It would be all internal calls in CUCM or from the old CUCM through intercluster trunking, so it would be:SIP device ---> CUCM ---> SIP device(2) orSIP device ----> OLD CUCM ---> SIP TRUNK ---> New CUCM ---> SIP device(2)Caller ID from all c...
I'm still unsure on how to block/mask ALL caller ID on incoming calls to one DN. The document says:"Cisco IP Phone users can block or mask caller ID displays for calls from a particular phone. The display of caller ID information for outgoing calls ...
We are in the process of upgrading to CUCM 9.1 from 7.1.5.We currently have the 2 servers(9.1 and 7.1.5) in a cluster trunk 9.1 is using SIP and 7.1.5 is using SCCP. The DN that we want all incoming calls masked is on the 9.1 server which is using S...
Good news. Got it working after dealing with the licensing team. They were able to get us a few licenses for SpeechConnect port and Speechview.Thanks for your help.
