Greetings,I'm trying to create a template for an HTTP application on a non-standard port with ANM 5.1.Here's part of my template:  <variable name="TCPport" type="port" displayString="TCP Port:" perm="ace_vip"/>...<config device="{$device}">    <slb> ...

Greetings.A pix 515E with software 8.0(4)28 connects the inside and outside networks. There are some servers in "outside" that have addresses overlapping with the internal subnets (192.168.10.25 and 192.168.10.26), and those servers have a reverse ro...

Greetings.I ran into the following bug on Cisco 1941 IOS version 15.1(4)M, 15.1(3)T2, 15.2(1)T and, probably, most other versions from these branches. However, the bug doesn't appear on any of the 15.0M IOS versions.A DNS server is located in one of ...

Greetings.What are the requirements for A-VPLS with IRB on cat6500?According to the documentation, it should work on cat6500/sup720 with an appropriate WAN card and SXJ1 software. But I didn't understand - should it work on Sup-2T without the WAN car...

Greetings.Is it possible to configure multiple (two at this point) IOS DHCP servers for a single VLAN with the servers using a common external database? The idea is to avoid using a double-sized address space for the VLAN.Configuring database agents ...