Hi Guys We are trying to make REST API calls in UCCE 11 over HTTPS.The Developer reference guides mention HTTP but not HTTPS, has anyone had any success with HTTPS? Any help would be massively appreciated.Thanks and Kind RegardsImran
Hi Guys
Can i please have some help?
Can i install CUCMBE 6000M on a separate Dell Virtualised server running ESXi 6.5 rather than on the standard ucs?
I would in fact like to go to CUCME (because they have 50 users) but the unity express versi...
Hi Guys
Simple Question,
when someone is setting the call forwarding settings in the sefl care portal - the options in the drop down list are "voicemail" and "add a new number..."
is there any way so that the users can select a name, rather tha...
Hi Guys Anyone seen any configuration in cucm whereby the user will be locked out of their phone profile if they enter the incorrect extension mobility username and pin incorrectly, lets say 3 times?Anyone seen any configuration to lock the users web...
read from below table 8: https://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/white_paper_c11-613550.html youre required to identify incoming and outgoing dial-peers numbers from your config. regardsImran
Hi There Did you get anywhere with this?I am trying to create an xml template for Zabbix to capture inbound and outbound call volumes over a sip trunk, and i dont think the template already exists. Wondering if your solution can help shed light on mi...
this is usual behaviour from some telco's. therefore if you have something like an inbound dial-peer as below - then you can direct the call as you please: dial peer voice 10 potsincomng called number .direct inward dialport y/y/y:15that will be for ...
Question 2: there are only one port why there are two network-clock-select on different port number?Answer: This is redundancy, the first command will try to be the primary source, and if not avalable will try the second command.