Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Since "Cisco Certification & Communities Support [[email protected]]" does not provide technical support and I don't have a service contract tied to my profile in order to create a TAC case, I'm posting here about this forum issue that...
Well, really trying to import CISCO-ENTITY-SENSOR-EXT-MIB in order to process traps from ASA with "snmp-server enable traps entity power-supply-failure" configured. Figures that CISCO-ENTITY-SENSOR-MIB is a prerequisite. After painstakingly loading u...
Not sure what to make of this, but I'm running into a 6509 that takes >90s to respond to queries from the Nagios check_ifstatus pluginwhen a particular SNMP RO string is used. It responds "normally" (within a few secs) if an alternate RO string is su...
Are there SNMP OID equivalents to the Status, Vlan and Type columns of "show interface status"?What about "show etherchannel summary" and "show lacp internal"?cat6513#show interface statusPort Name Status Vlan Duplex S...
1. The "500" and "48" parts of "500.51, .48.50" appear to be VLAN numbers on your device. 2. There're two books that seem to address this question:http://www.google.com/search?tbm=bks&hl=en&q=stpxRSTPPortRoleValue&btnG=#hl=en&q=stpxRSTPPortRoleValue&...
With EEM 2.4 and later, you could correlate multiple events in an applet. Seehttp://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6555/ps6815/whitepaper_c11-492226.htmlor https://supportforums.cisco.com/thread/2049656 for an actual example.
Given your now deleted message that included the log snippet "Required RAM space is 4096M and System RAM space is 4095M", I think it's this SQLAnywhere bug, which would need Cisco to issue a patch integrating the fix from Sybase:http://www.lmpx.com/n...
Either it's a misquote, or the book has a typo, as it probably meant to read "CIDR may help reducing tables by advertising both as 170.15.0.0 /23 [255.255.254.0]". The answers are "no" and "yes" to your two questions, respectively.The address savings...
According the documentation, "configure replace" applies the same algorithm as "show archive config differences flash:config.cfg running-config" so if vlan 15 is not seen in the latter's diff output, the former won't replace it either.The reason vlan...
