How do you disable a mailbox in cisco Unity connection administration 8.6.2.2?The cisco documents that I googled up with are outdated.ex. I just want to disable an individual mailbox so that no new messages can be left for the individual and the ind...
So I upgraded a few Cisco codec C40 and C20 from 5.1.6 to 6.1.2, the process was smooth. It upgraded the codec device and the cameras but once the upgrade was completed, the cisco touch panel lost all the meetings. Is there a way to put all the m...
I recently upgraded the software on a cisco codec c40 device.The software also upgraded the firmware on camera1.Unfortunately it didn't upgrade the firmware on camera2.The cameras are daisy-chained.Is there a simple way to upgrade the firmware on cam...
wireless access point: Verizon mifi4620LE Jetpackcase1: Verizon jetpack set to use WEP128bit for security.Cisco 9971 phone with wireless enabled and SSID entered, then went into Security mode (7) -> Open with Wep (2) ->Edit -> Static WEP Key1 (3) ->...
Scenario:(using CUCM 8.6.2.21900-5 for phone and Unity for voicemail)If someone calls phone_A and phone_A does not answer, the call is fordwarde to phone_B (cell phone) using "Remote Destination Profile Configuration / Remote Destination Configurati...
Thank You! I was able to enter the password in systems-navigator-(select each endpoints)-connections and that solved my authenication issue which in turn solved the meetings not showing up in the touch panels/endpoints. Thank you everyone.
How do you set it to resend the calendars?I went and dig into the TSM and found that one of the "Templates - Update Systems with template xxxx Endpoints Cisco" failed daily due to "Authentification failure. wrong password for system "xxxxxxxxx"That t...
