Hi,  I am getting many radio resets on 1252AG access point on Wism1. The warning in WLC shows as : AP's Interface:0(802.11b) Operation State Up: Base Radio MAC:c4:71:fe:5c:xxxx Cause=Reset on transmit completion. Status:NAcause = reset on transmit co...

Hi,  Is it possible to connect directional antenna on slot 1 5Ghz radio on the 1522SB and use it for client access ? As per the deployment guide there is a note that Omni antenna is required on slot1. If i connect directional antenna on slot 1(how wi...

Hi,  1. ) Is it possible to use the PoE port and the fiber port of the 1552 at the same time to provide dual uplinks ? 2) If not, can i use the PoE port just to power the AP and use the fiber uplink for data connectivity ? regardsJoe

hi All,  I have a head quarters with two WLC5508 anchored to another 5508 on the DMZ. Now we want to roll out wireless guest to the branches with local switching of guest wireless traffic. The guest ssid used at head quarters is anchored to the guest...

hi All,  I am trying to install AC3.1 on windows7 64-bit. But i get the error installation ended prematurely without any reasons for failure. I posted the errors here. I tried installing AC3.0 on windows xp and i get same problem. NAM is not getting ...