hi group..i have pretty basic questions regarding upgrade from CUCM 5.1(3) to CUCM 8.6but leading into it would take some time - ..customer is moving from CUCM 5.1 to 8.6 and of course changing HW..fresh install and copying the config is always an op...
hi to all..i have a simple question and i didn't find it explicitly explained in cisco docs..our customer has CCX41 and they bought upgrade to CCX8.5 ( for 8 ENH agents upgrading from 41 to 8 PRE agents on CCX 85 ) ..so, we received two PAKs:CCX-41-8...
hi to all..our customer has ccx 8.0.2 SU2 just installed..agents are receiving calls and everythings looks fine for starters..but, we noticed that when agent receives a call, status bar in CAD is blinking and changing from "partial service" to "in se...
hi to all..we've installed ATA 187 in CUCM 7.1(5) for fax services..before ATA 186 EoS, our client used ATA 186 and now they've bought bunch of ATA 187's..so, on ATA 187 we're receiving fax sucessfully, but we cannot send faxes towards PSTN..since AT...
and what happens if we use ISE just for basic AAA over radius as a replacement for ACS..for example, 500 routers&switches which need AAA for admin&management access..do we need 500 basic licenses or not?.. thanx.. regards..
hi to all..the same things happens here..also exchange..cwms 1.5..the latest MR3.."Unable to establish a connection with the mail server. Please recheck settings"..this message pops up and vanishes from time to time..at that time also status in mail ...
hi ronak..o.k., thanx..but i'm just curious did we understood each other correctly..i'm aware that if i license the staging 8.6 cluster that i need to do rehost license for 8.6 production server..but my greatest concern is for intermediate versions....
