I have been working with so many clients and service providers and came up with a Cisco Quality of Service template that suits most of my clients. This template needs to be modified in little to accomodate your client requirements. I have captured tr...
Two very important VPN technologies have been introduced over the last 10 years: Dynamic Multipoint VPN (DMVPN) – with us since 2000Group Encrypted Transport VPN (GETVPN) – with us since Dec 2006 Both technologies has revolutionize network securit...
I have a client with a very simple setup. Below is the hardware configuration of CME -NAME: "CISCO2921/K9 chassis", DESCR: "CISCO2921/K9 chassis"PID: CISCO2921/K9 , VID: V06 , SN: FGL16111253NAME: "2nd generation four port FXO voice interface da...
Last weekend, I had a weird issue. My client setup is as below -CUCM ---- SIP Trunk ----> CUBE ---- SIP Trunk ----> SIP ProxyClient is having 1800 users spread across 100+ sites.When one site dialing internal extensions of some other site, everything...
Thanks for a good reply brother -I see you occasionally use NBAR matching, but you don't use it where it might match better. For example, you match HTTP on ports 80, 8080 but I believe NBAR will identify HTTP on other ports too. You also match HTTP...
That's why I said you need to modify as per your requirements. My purpose is to save your time in finding ports and protocols. This template is running for few big clients sized from 200 to 400 sites.Bandwidth allocation is on your network policy and...
MateYou need to make sure that CTI Gateway Profile is configured correctly in the CUPS.Also make sure that it is applied to all Users.The next this is to make sure that CCMCIP profile is created and configured properly and is applied to all users.Mak...
The MAC address <002699437EC9> is not associated with the JTAPI user.A register request failed with error 'Specified device not in provider's domain: 002699437EC9'. Retries will occur automatically.I would make sure your JTAPI user has the Standard ...