Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
When a DMP is not displaying any output on the connected screen, the problem can vary from a connectivity/network issue to a misconfiguration to a software problem to an hardware issue. So it is important to perform a good problem diagnosis by follow...
Hi Micheal,Can you maybe add a few screenshots to show how exactly this fails?Have you tried different clients/browsers to perform the operation?Are you logged in as "superuser" when trying to add the new users?I assume you are using the DMM embedded...
Hi Elter,No, you still have two separate hardware devices running the SNS 5.3.12 and the DMM 5.3.12. I believe the DMM HW part is "DMMC220-SNS-K9". There are bundles including the two hardware devices anyway, your Cisco Account Team would be able to ...
Hi Jason,Which DMM/SNS software versions are you running? There is a known defect on 5.3.6 that could be causing the error you are seeing:CSCuf17696 - DMM-SNS - HA setup errors out with CSYNC errorBest option in any case is that you open a TAC case t...
Hi Novri,You have a different situation from Mark's one. The DMMC210-K9 can be upgraded to DMS 5.4 version, while Mark's MCS-7835-H1 could not. So in your case, you could potentially upgrade your DMM to DMS 5.4 and then migrate the 5.4 DMM to a VM th...
Hi,Indeed this is not expected to be seen on client side and would cause issues. This normally means there is some "leaked" packet from the WAN that is bypassing the WAE and reaching the client directly, so you should try to trace the exact path of t...
