Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a situation with my switches and Solarwinds. I have layer 2 switches that use a default gateway but are getting a route somehow. I will show a switch down in Solarwinds even though I know it isn't down. When I get on the switch and do a show I...
I have a WLC5508 controller with LAP1142N, LAP1262N, CAP3602I, CAP3502E and CAP3501I APs. It seems when a site loses power or connectivity to the controller, some of the APs reconnect and some do not. At some sites all do and at some sites some do an...
We are using a 3925 router - c3900-universalk9-mz.SPA.150-1.M4.bin - as an H323 gateway with 2 PRI's. We have a PUB and a SUB running - System version: 8.5.1.11900-21 When we place people on hold we get MOH very intermittently. Out of 10 calls 8 migh...
Hi all, I have a CUCM7.1 in the US and a CUCMBE 6.1.5 in the UK. We use Presence in the Us and I am wondering if I can use the same presence server for the folks in the UK. I have trunksin between for dialing back and fourth. Being that the system in...
I have a CUCM 7.1 and CUCMBE 6.1 with Intercluster trunks. The Intercluster trunks work for calls back and forth between offices. Both systems use SIP for PSTN calls. I want to be able to dial from system A through system B and out. Any help would be...
OK. I fixed it.1. Set the phone for Wireless Headset Hookswitch Control "Enable" on the device page, Save>Apply Config2. Factory Reset the phoneWhen the phone came back from factory reset it now shows under Device Configuration>Media configuration>H...
The issue we are having is that even though you set the phone for Wireless Headset Hookswitch Control Enable the phone will actually not set to enable when you check it under Device Config>Media Config. Wireless Headset Hookswitch Control is still s...
