Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Hopefully someone has come across this problem before...The testing topology looks like this:10.250.2.50 (VLAN 2502) -----> Nexus 2K -----> Nexus 5KA (SVI 2501, 2502) --------> Nexus 2K ------> 10.250.1.50 (VLAN 2501) LAPTOP A ...
Hi,We've got two Nexus 5548UPs that are vPC and HSRP peers.I've had some feedback that I should incorporate the tracking function to close the vPC down in the case of a layer 3 problem, the thing is I'm not sure it's required. I can see in this artic...
Hi Guys,Can I please have a recommendation on the most stable release of IOS to use for Cat 3750 and 2960 switches.The 3750s will be stacked.The 2960s will be used for DMZ switching.Thanks,Nick.
Hi Guys,Deploying a pair of Nexus 5548UPs in the next few weeks and was wondering what NX-OS is recommended and stable.The switches will have the following functions:- Core switching- Native FC and FCoE- vPC- Layer 3 routing (L3 Daughter board instal...
To add to this.. I put both machines in the same VLAN 2501..They can ping each other, they can both ping 10.250.1.1 (and SSH to)However, Laptop B can't see 10.250.1.3 (I shut down 10.250.1.2) but Laptop A can.
Which 3.x.x.x release is considered BU?Most businesses prefer to stay at least a version behind.. so that would suggest two options:3.8.2S(ED)3.7.3S(ED)
Which 3.x.x.x release is considered BU?Most businesses prefer to stay at least a version behind.. so that would suggest two options:3.8.2S(ED)3.7.3S(ED)
I have to disagree with you on this one Louis,Perhaps there was differences? Maybe your configuration was in L3 mode and that makes a difference. I performed the migration as per the instructions and the VSM on the VM and the Nexus 1110-s would not e...
