Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We've detected strange behaviour from our Cisco Prime Infrastructure. We did a upgrade from 1.3 to 2.0 last friday and all looked good and well. However, we noticed that our SNMP locations were missing from our network devices. With some research,...
Hi there,I've got a rather odd situation going here. In our company we use NetFlow to measure network traffic. Some of our NetFlow devices have gotten an upgrade and stopped working. When I look at the configuration, I see:ip flow-cache timeout activ...
Hi,I’m currently at a loss here:In our organisation we have multiple Nexus 5000 switches, which Cisco LMS 4.2.2 cannot get the running-config and startup-config from with the Archive Management process. When it does try to get them, I get a error as ...
Hi,We recently experienced that our VPC peer-keepalives are not working as we expected it to be.Last Tuesday we saw that between 2 Nexus 7000 switches the VPC peer-keepalive was not working. On one switch we saw that it stated that the link was alive...
Hi all,I'm currently trying to install the Cisco LMS 4.2 Appliance on a VMware vSphere 4.0 environment.I'm following the http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/install/guide/instl.html#wp1689675guide.I downloa...
Hi, sorry to the time it took to answer your question.
I believe we did configure the network-admin role in Radius with our network admins group, so that we could login as admins. However, that was a long time ago and things are fuzzy for me how we s...
Hi Rolf,I searched across the Cisco site and didn't pay too much attention of the different types of 3560 switches. Because I saw the commands in IOS, I immediately thought that they would work. (Assumptions...)Well, I did some research and it turns...
Hi,Unfortunately, I no longer use LMS anymore as we switched to Cisco Prime Infrastructure 1.3. We got an answer from our supplier stating that LMS 4.2.2 did not officially support Archive Management for the Nexus platform, but Prime Infrastructure d...
Hi Roger,I have no idea how to correct this in LMS. As far as I know, there is no option to correct this. I also contacted our supplier with this question and they stated that the Nexus portfolio is only supported for Fault Management and Network Top...
Hi Afroz,Still no luck, I'm afraid. I'm still getting the same error: Device Name Read Community Read Write Community SNMPv3 Telnet Enable by Telnet SSH Enable by SSH SF-DERA-01OkOkNo Value To TestProtocol not configured.Did Not TryIncorrectD...
