About Paul Woelfel

Paul Woelfel · 02-24-2014

Hi community!We are using more and more touch panels at our installations and I just noticied with TC6 and TC7 that you are not able to select the call method.For example you got a phonebook entry in your central phonebook with H323, Sip and ISDN add...

Paul Woelfel · 02-11-2014

Hi all!I have some systems registered to CUCM and added to TMS for booking. Most of them work fine, but for two of the systems I get an error in TMS:"#1302 - System Is Not Registered with Unified CM"If you look at CUCM the system is registered and CU...

Paul Woelfel · 02-03-2014

Hi Community!I tried to enable Mobile and Remote Access, but I'm having a issue with adding the IM&P Servers. If I want to discover the IM&P servers, the VCS fails when reading some internal root certificates. That's the AXL Request:<soapenv:Envelop...

Paul Woelfel · 11-25-2013

Hi all,I'm trying to force TMS to show the SIP URI for Dial-In participants all the time in the meeting invite. The URI is in the email, if I add an Dial-In particpiant or the connect mode is set to OBTP. If set to Automatic Connect, this address doe...

Paul Woelfel · 11-21-2013

Hi,I just freshly installed a TS320 and tried an upgrade to the latest version, from 3.1(80) to 3.1(95). After the upgrade the TS fails to boot. I can see that log messages at the console:121648.380 MEDIA : Info : ------------------------------------...

Paul Woelfel · 01-05-2016

The config generator is a great help! I found one bug: The selfcare URL should be a URL not a FQDN: <selfcareURL>https://ucmhost.domain.local/ucmuser/</selfcareURL>

Paul Woelfel · 10-10-2014

Hi Oliver,the issue is on the IM&P side. If you recreate the IM&P certificates, this might fix your issue. Alternatively you can open a TAC case. The TAC engineer can get root access to you IM&P and fix that issue. There is also a bug for that, but I...

Paul Woelfel · 10-10-2014

Hi Oliver,this was an issue with IM&P 9. Did you upgrade to IMP&P 10.5 ?If so, you can try to recreate your certificates.

Paul Woelfel · 09-23-2014

Great to hear! I'll upgrade and try this asap!

Paul Woelfel · 03-25-2014

Hi Dana! The nice thing with conductor is you can register conductor to CUCM as Trunk, as CFB and also on VCS. You can define with your call rules and the locations on Conductor if Calls should be routed through CUCM or VCS. IMHO it depends where you...

Member Since	‎03-26-2010 06:58 AM
Date Last Visited	‎02-08-2021 12:46 AM
Posts	263
Total Helpful Votes Received	44

User Statistics

User Activity

Touch Panel select call method

TMS shows system as Not registered with Unified CM

Mobile and Remote Access VCS-C AXL Error

TMS Meeting confirm always show video address

Factory Resetting a TS320

The config generator is a

Hi Oliver,the issue is on the

Hi Oliver,this was an issue

Great to hear!

Hi Dana! The nice thing with