Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiWe have two vem installed on two ESX with two CPU.We have installed 4 licences. Everything works fine but the output of "show licence usage" is different from our other nexus1000v.# show license usage Feature Ins Lic Status ...
Hi evryoneToday we have a problem with our ASA.We have tried to change some inspection values (H323). The asa tried to delete the values but cannot change them.We says that maybe it's a Bug and log out.Next logging, he says error 503. No asmd, no ssh...
Hello We have an ASA that send netflow to a monitoring server. The problem with systems that send data such as permanent UDP syslog, netflow ... is that the UDP session timeout keeps the session open permanently. So, only one Hit at the acl and not s...
HiWe have a WLC4402management interface IP is192.168.0.10 on the192.168.0.0/24 network. VLAN 105Dynamic interface 10.31.0.4 on the 10.31.0.0/24 network for wired en wifi users VLAN 101 SSIDV101another vlan (106) where RADIUS and other server are.(not...
HiWe use a WLC 4402 and 11 AP 1250.My clients are Windows seven.When they are connected to wireless, all my clients have randomly RTT peaks and packets Loss (2% average).I enable link latency between AP and WLC. Max RTT are from 20 to 64ms.Any idea ?...
Hello Lucien We will buy a pair of Nexus 5000 to interconnect racks containing Dell chassis. They each contain a pair of switches 3130X. In a rack there are four chassis. We would like to make a stack of 3130X inside the rack and connect it with th...
Thanks for your answer.There are many others vlan and SSID and we don't want that other users could connect to their dynamic interfaces.The best solution we found is to use service port interface with specific routes.Thank you again for your guidance
