About rsjordan00

rsjordan00 · 04-18-2016

I'm trying to deploy 1000v in a lab and I'm having trouble adding an ESXi host to the 1000v switch. I'm using VSUM 2.0 wizard to add the ESXi host to the 1000v. The vSphere Tasks shows the following line: Name: Add host to Cisco DVS, Status: fault.co...

rsjordan00 · 08-18-2015

I recently noticed intermittent latency when pinging my ASA's interfaces. I see the same latency when pinging hosts through the ASA.For instance, when I ping the ASA's interface on my local network, 172.16.0.1, I normally see 1ms RTT, but every once ...

rsjordan00 · 03-29-2013

We recently extended our access layer using a pair of 5ks with extenders. We have a pair of 6509s at our core and they handle the intra-VLAN routing with SVIs. I recently noticed that access hosts connected to the extenders cannot pass traffic betwee...

rsjordan00 · 03-08-2013

A while back I changed my internal interface ACLs so we must explictly permit traffic between internal networks but still retain access to the internet. I chose to use an object group containing the three RFC1918 ranges to define the private networks...

rsjordan00 · 02-15-2013

We have a 2960S using a single SFP-10GBase-SR to our Core switch. We are planning connecting the 2960S to a pair of Nexus 5k switches using Copper SFPs. We are already doing this on another 2960S so I didn't expect any surprises.When I removed the un...

rsjordan00 · 09-16-2015

Running 9.4.1 and I can confirm it has not been corrected.

rsjordan00 · 08-20-2015

Thanks for the suggestions. I ran a capture on the firewall it does not reflect the high response times I'm seeing in my ping output. I checked the switchport interfaces where the packets travel across and didn't see any interface errors. I think I m...

rsjordan00 · 03-05-2015

Hey Neno, do you use a generic flow chart or some other group of shapes? Any chance you can attach a generic template?

rsjordan00 · 11-06-2014

I don't know why it would take 10 to 15 minutes for TCP applications to recover. Do new connections pass through the firewall? Maybe you have some ARP caching or possibly switch port security is causing delays learning the new MAC address of the seco...

rsjordan00 · 11-05-2014

The ASA is a stateful firewall so it tracks all the connections. When you boot up the backup ASA there is nothing in its connection table. It will drop all the traffic from those previous connections because it did not see the initial TCP handshake. ...

Member Since	‎06-18-2008 05:45 AM
Date Last Visited	‎08-31-2018 12:01 AM
Posts	40
Total Helpful Votes Received	19

User Statistics

User Activity

Failure Adding ESXi Host to Nexus 1000v using VUM 2.0

ASA 5515 - Intermittent ping latency on ASA interfaces and through the ASA

Intra-VLAN traffic not passing back to Nexus 5k

Does "sysopt connection permit-vpn" bypass all interface ACLs?

SFP-H10GB-CU3M not working in 2960S

Running 9.4.1 and I can

Thanks for the suggestions. I

Hey Neno, do you use a

I don't know why it would

The ASA is a stateful