Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, We are having problem with the transfer, conference and MoH when call go to the PSTN phone cisco - CUCM - CUBE - ISP - Phone When I do a Call to the pstn, it is completed correctly, but when try to do a transfer or conference with other phone...
Hi guys,We are installing IP Phone in a new customer and CUCM 10.5.The services is OK, but we are having problem with phones by meeting room.When users use speaker into of meeting rooms, the callers hear bad sound, like a echo.We test with ip phones ...
Hi all, We are integrating Cisco CUCM 10.5 with Lync, but we have a problem with the Called ID. Example: Cisco Phone Call to Lync, Lync receive The ANI and the calling Name, but Cisco Phone not display The called name. only Display the number dialed....
Hi all, Please I need your Help. Our customer is migrating the Telephony to Cisco. This migrating is partial, then we interconnect CUCM with PBX Nortel using Gateway H323. The problem is with the Caller ID between the calls from Cisco to Nortel and ...
Hi all, We have CUCM 10.5 with Prime License manager coresident, but I can´t logging to Prime License Manager. When I put the user and password and press button start session, the system try to enter, but never finish. Please your help regards,Guill...
Hi Ayodeji, I try using midcall-signaling passthru media-change but the problem continue The call is established, but not hear audio when I transfer between two Phone external. Regards,Guillermo
Hi, The connection is with two E1 Pri from the Gateway to the PBX Nortel CUCM --> GW H323 -->PBX Nortel Here is the configuration controller E1 0/0/0 framing NO-CRC4 pri-group timeslots 1-31 description Conexion PBX NORTEL!controller E1 0/0/1 framing...
Hi Vivek, Yes, this parameter in H323 gateway is checked. In the Gateway I take a debug ISDN q931, and I saw the Name display, but in the Nortel PBX not appear. regards
Hi Martin, Thanks for your answer. Definitely the solution final will include this equipments TPS 8710 in a MSE8000 ChassisVCS CVCS EConductor 90 Endpoint of video (Cisco, Polycom) I am looking information, about the installation and integration, b...
