Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
what meas the follow erros log.Is an information message or is necesary to take an action? Mar 3 10:40:50 GMT: %IOSXE-3-PLATFORM: Switch 2 R0/0: /usr/sbin/boot_verify_package: File /ucode0/lost+found is a directory
Hello
Community
Please can you help me.
I have my ISP that give me a new circuit with RJ48 of 155 mbps.(copper)
My router is a 7200 with a GBIC WS-G5483
The Cisco 1000BASE-T GBIC (product number WS-G5483) connects a GBIC port to Category 5 wiring...
Hello Community
i have some dude with the metric in eigrp to influence somo traffic IN and OUT for the same ISP.
i want that trafic are incoming and outcoming over second path(ISP2) and the first path(ISP1) stanby
Thanks you for support.
Hello I have a wlc 5508, with the version 8.0.110, with 221 APsIt reboots automatically. Manufacturer's Name.............................. Cisco Systems Inc.Product Name..................................... Cisco ControllerProduct Version...............
I have some question with a device cisco 3400 metroaccess. In a interface i have this config. 3400_METROACESS#sh run int g0/1Building configuration...Current configuration : 449 bytes!interface GigabitEthernet0/1 description switchport access vlan 19...
having the same issue, cant access to GUI to the vmanage on my home lab.the solution is just wait a 10 minutes after the vpn512 UP of the vmanage and try again by GUI vManage# sh int vpn 512interface vpn 512 interface eth1 af-type ipv4ip-address 192....
hello I have an ISR 4331 with IOS XE Software, Version 16.06.05.The issue was the high memory process not the cpu process. ------------------ show process memory sorted ------------------Processor Pool Total: 1839083368 Used: 366550080 Free: 14725332...
