Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got a client with an ASA 5510 that is now interested in utilizing the AnyConnect VPN client. In acquiring licensing, they were quoted by a third party the AnyConnect Plus licensing. Research shows that this only applies to the Secure Mobility ...
Per the title, does anyone know if this is supported? Two 3850s in one stack, two 2960x's in another stack, and etherchannel between the two stacks? Sounds like it should be good, but I cannot really find too much documentation on this being suppor...
Hello all; I'm trying to make heads or tails of something regarding lightweight access point support. This is in regard to the 1100 series of access points; the data sheets for the 1100 say that it can be converted to LWAP, but that it can only be u...
I'm attempting to use an ACS 4.2 appliance to authenticate / authorize users on Brocade SAN switches. I have added the AVP and VSA to ACS, and they all show up in the web interface to select. When I configure a specific attribute for authorization ...
I have a need to change the local account on a herd of SSM modules. I have CSM 3.2.1, but cannot find a place to add / remove accounts from those modules. I doesn't look like you can do flex configs with those either. Seems like a pretty simple jo...
No sir. I just went back to using local admin on the Brocade switches. I could not get ACS to work. It seemd like it was not getting the correct login information, etc. Neither Brocade or Cisco would own up to it, so I just went back to local use...
I had originally started with just the AVP and the one VSA for Auth-Role, and could not get it to work. I then added the other AVPairs, figuring those were needed. Once I found the stuff in the sniffer trace, I removed the AVP (also removing the VSA...
The CSV file that you created has the same information in the same fields as what I had created. The only difference that I can see is that I created the AVP in one file, with a restart (action 355) at the end, then used a second file to create the ...
