Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,
I need to generate a predictive wireless survey report using Prime so we know how many access points are needed to provide full coverage. We have an empty space in the middle of the building and I am not getting an option to exclude this are...
Hi Folks, Just a quick question about radius fallback feature.So If i use active radius fallback with two radius servers on the WLC, How does the function relate when I choose to override the use of default servers in the WLAN?In other words, will t...
Hi, We recently upgraded from WCS to Prime infrastructure and i'm trying to figure out how to browse the configuration backup files that Prime pulls from the controllers. I have enabled the TFTP/FTP servers under server settings and set the Controlle...
Hi All, I would like to know if the recommended WAN latency of 100ms for Voice + Data as per the H-REAP design & deployment guide holds good if we are using locally switched WLANs + central 802.1X authentication? I read somewhere that the 100ms requi...
Hi All, We have a small issue while creating guest account through WCS. Since the WCS is located in a different region than that of the controller, while creating guest accounts, the WCS considers the local server time and not the time on the WLC. I ...
Let me know how it goes.
But I was able to fix my maps. I figured it was due to duplicate entries of the devices, we had the same device present in prime with different IPs. it worked after I deleted both the entries and added just one.
Some cases I ...
Hi Rasika, Thank you for your response. I think you answered my question.Do you know if there is any command on the WLC to check which radius server is currently active for a WLAN. or is debug AAA my only option to find this?BTW, I have found your b...
