We are using CUCM 7 in our company. I have to monitor calls and record some calls manually or automatically. can cisco desktop agent do this, or I should use 3rd party applications? what application works well with CUCM 7? any suggesstions? ...
I am using CME 3.3 on router 3660 with 7940 and 7960 IP phones, but I am going to migrate to 3945E, so I've requested following part numbers:C3945E-CME-SRST/K9, FL-CME, FL-CME-SRST-100 Do I need SW-CCME-UL-...(IP Phone User Lice...
we are using call manager express 3.3 on a 3660 router and about 80 employees are using VOIP but most of company use traditional analogue PBX. we want to use VOIP for all employees (about 700 employee). we have 3 building that are connected together ...
Since the DNS role has been dedicated to Windows 2003, clients on your network just need to acquire the IP address of mentioned DNS server via DHCP. So for using DNS server there is no need to configure anything on switches.
If you exclude all pool range then new devices will not acquire IP address automatically. For reserverd address you can use IP address in the excluded range. for example if pool range is 192.168.1.0/24 then you can exclude all range by:ip dhcp-exclud...
As you know SVI represents a VLAN of switch ports as one interface to the routing or bridging function and only one SVI can be associated with a VLAN. current L3 switch platforms support maximum 4096 VlAN, so in teory this means that we can not have...
Router will assign IP for each VLAN based on interface or SVI IP address. for examle if we have vlan1 with IP range 192.168.1.0/24 and vlan 2 with IP range 192.168.2.0/24, and you assign a IP from 192.168.1.0/24 to an interface or assign this IP to ...
1 – Can I have a Vlan that delivers both VOIP and data while its being a Vlan specific for different departments?you can have a VLAN for both VOIP and data, if you dont want to implement QOS. in this methos ports whitch connect to VOIP phone shoulbe...
