Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, We are trying to implement dynamic ACL's from a SAN Field within a certificate on an endpoint device (typically mobile devices). The process will be as follows - Unregistered device will connect to an unsecure SSID in a build room - At this p...
Hi all,We have an SSID (broadcasted) using 802.1X enterprise authentication by user client cert against Cisco ISE/Windows AD.APs are MR52 on version 27.6.The option to enable 802.11r does not appear on the SSID settings page.It does appear on, for ex...
I have 3 MR52s on 27.6.One of them is connected to the wired network and it gets an IPv4 address from my DHCP server, and a valid IPv6 SLAAC address, so it's clearly seeing the router advertisements.The other 2 MR52a are meshed to the wired one.Any w...
Hi guys,
Having an issue with our ASA 5515-x with Security Plus License. I was under the impression that AnyConnect for Mobile should be included with this but it's showing as disabled.
Any ideas or know if we need an additional license of some kin...
I have the following topology across 2 data centers: Customer switch-1->3750-1->Nexus7k-1->OTV->Nexus7k-2->3750-2->Customer switch-2
The customer switches connect into a dot1qtunnel port on the 3750 at each end. Layer2 Protocol Tunneling for STP is ...
I got a similar issue where the traffic is not getting through and has the following error:
Phase: 9Type: WEBVPN-SVCSubtype: inResult: DROPElapsed time: 428 nsConfig:Additional Information:Forward Flow based lookup yields rule:in id=0x15044ce39c40, p...
We have an answer from Meraki support.It is Cisco ISE causing the non-availability of 802.11r.Apparently because RADIUS CoA is enabled by design when using Cisco ISE for authentication, this disables 802.11r. According to Meraki, "due to CoA...we nee...
Thanks but I've read that bit of documentation, and I know where the 802.11r option should appear (see below).Is a firmware update required from 27.6? Perhaps someone from Meraki can answer that.What is more strange is that an SSID with PSK authentic...
