Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey guys,I am having an issues stripping of a site code using a translation pattern. Here is what I have.Interside Dialing Code = 4Side Codes = (1-9) Small companyExtensions = 3 digits (I know I know It should be 4, but they like 3 digits)Example Di...
Hey Guys,We are looking at a customer that is converting to VoIP. They will have about 7K phones with about 14 PRIs. My first question is there a better way to set up a bunch of conference bridges besides loading up gateways with a bunch of DSPs? ...
Hey Guys,My question is in regards to creating different presence groups and having default contact groups when a users loads the CUPS client.For example I created marketing, accounting, and finace presence groups. So when a user loads the CUPS clie...
@Jonathan Schulenberg No matter how many times I come on here to try and figure things out because the thought of opening a TAC case make me physcially ill, there you are holding the digital torch saying "following me to the answer".
The status/logging is not the best in expressway, if you have access to CUCM it would be easier to just find the device and see if its registered, the IP of the device should be one of the IPs of Expressway-C if its registered over MRA vs On Net. Ot...
Fredrick, Can you state what is working and what is not? It sounds like softphone to softphone is not working, but soft phone to desk phone is working. Is that correct? If that is the case its most likely a VPN / Firewall / Routing issue on your VPN...
David, Thats a tough issue have you grabbed any packet captures on the gateway or fax server and listen to the fax call? You can hear if there is any packet loss of timing issues between the CNG tones. Also have you tried enabling T38 with fallba...
