Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Message to visitors: this document is work in progress, will update in the coming weeks several times!
MPP 6800 series - DECT Deployment Guide
DECT stands for Digital Enhanced Cordless Telecommunications and is a standard for wireless voice services ...
When phones are being provisioned they will traditionally use TFTP or HTTP. While working it would be better to add a layer of security by enabling HTTP_over_TLS (known as HTTPS) and combined with Authentication by either UID/PWD or an encrypted con...
Hi Maren,
Migrations can be done MPP2Ent and Ent2MPP and can be done over and over again. The process is simple if you go to upgrade.cisco.com and follow the instructions. Basically its: generate/request license, upload to upgrade.cisco.com and poi...
HI James,
When you create a new user/device in control hub WxCalling the backend system takes care of creating a zero touch provisioning (Cisco EDOS) entry. When the phone is factory reset (or fresh from the box) it will go thru it's boot cycle.
...
Hi Lesley,
A couple of observations:
- the phone is running an old firmware (not the cause of "no network" but makes sense to upgrade), the latest is now 11.2.3
- a provisioning url is always provided by the provider, we (Cisco) can provide redirec...
Hi,Next to the ports on the back you will see a sticker/label that contains the PID (Product ID), S/N, MAC,..On that sticker you will see something like CP-851-3PCC-K9= (if it is a phone for 3rd party call control) or CP-8851-K9= if is designated to ...
Hi,The 7821 you refer to is running enterprise firmware (so for CUCM/HCS/CME call control). What is the call control you are running as missed calls should just appear on the display.The document you mention is a MPP (3rd party call control) firmware...
