Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears, We set up a MW P2P link between branch and HQ to get internet from HQ and it's working fine as per the topology attached. My branch devices and Pcs are configured with IPs from subnet: 192.168.99.0/24 GW: 192.168.99.1 and all within vlan 1. so...
I'm doing a lab about NAT and I came to a point where I need an explanation because I really don't know whether there is an issue or not.
My lab is shown as per the photo. my router conneced to ISP router and connected to switch for Lan Users.
I ...
I'm doing a Lab and it's very simple. it's just like I need to confirm some commands but I'm really getting upset. here is my lab. I configured a vrf and a loopback interface which I apply it under the vrf. the loopback has been disappeared from the ...
Heey, all As an ISP provider, We are trying to connect Multiple customer sites via our Mpls core. our plan to give each customer site a different vlan ( c-vlan) and then translated to S-vlan to transport the frames through our network. we know about ...
Dear Beloved engineers, direct to my question without longer intro, I'm trying to establish a l2vpn between customer sites via Etherent over mpls. we want to connect the customer A site with vlan tagged and customer B site with untagged vlan. We trie...
Dear MH311x,, I need more explanation to clarify your configuration.. the root for vlan 2 is another switch which has MAC (XXXX.XXXX.2580), how is this switch connected to both c3560 and c2960. I believe the other switch is somehow causing the othe...
Hello, Then the original issue is solved as the connection between ASA and tftp server is established now. and It seems there is an issue with your SolarWinds server causing the drop and sorry I haven't used it so i can't help. you can go to SolarWi...
After adding the subnet to ACL, can you ping the tftp server from ASA?? and make sure you add the subnet with exact mask. Also verify that 72.138.150.x/28 subnet is displayed under route details on AnyConnect client. best regardsAsem
hello, You can't access TFTP server from ASA because ASA is using outside interface ip address as source and Outside interface subnet is not allowed to communicate over VPN tunnel because the subnet is not included in spilt-tunnel ACL. Just add 72.13...
Dear Zach, @Zach1234 wrote: when I ping the gateway of inside nat ip address of the nighthawk router from any host not directly connected, it doesn't work.where this ip 192.168.45.2 is configured??Do you mean you can't ping from hosts on different s...
