Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Have a strange low-priority problem. We currently build a new network for a customer with following Cisco products:Access = Catalyst 3650-48FD (XE 16.9.4)WLC = 5520 (8.5.161.0)APs = 2702iISE = 2.6 (patch 4)We use MAB authentication for the APs with p...
Hi guys. This is just an information about an undocumented bug in Gibraltar 16.12.2. I installed this IOS although not recommended on mu Catalyst 9300-24P and 9300-48P, having each 2x 715W PSUs. Everything was stable, operations perfect. Then we star...
We have a network consisting of a 2x 5k core, 2x 5k DC distributions, 2x2 5k DC L2 aggregation and 2x 3850-48XS Campus L3 distribution (see attachment). The rendezvous points (RPs) are being shared on the cores switches via MSDP and all L3 devices po...
I upgraded the customer's Prime infrastructure from 3.1.5 device pack 12 to 3.1.7 device pack 15. He complains that ever since this happened, he sees folllowing statement in the "Interfaces" group of the "Switches and Hubs"- "Configuration" pane:
"...
I upgraded the customer's Prime infrastructure from 3.1.5 device pack 12 to 3.1.7 device pack 15. He complains that ever since this happened, he sees folllowing statement in the "Interfaces" group of the "Switches and Hubs"- "Configuration" pane:
"...
OK I found out, that it doesn't work from the PC where you host the vWLC inside your VMware or KVM. If you go onto the Management IP from a different PC - it works. It is weird. I also tested a Linux hosted on the same machine and I was able to get o...
Unfortunately, this doesn't solve the problem Martin was describing here. Of course your will let you enter the GUI / SSH via Service Port. But the question was - why the vWLC is pingable from the same subnet, but you cannot https/ssh to it from the ...
Regarding the 802.1x AP authentication. I did follow exactly the link you posted Cristian and always get a successful authentication in the ISE looking like this:As you can see, that AUTH process is successful, but for some reason ISE doesn't give th...
