Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We replaced two Nexus3500 devices (C3548P) with two stacked Cisco 3850 devices. The two C3548P devices were connected with two links on which the BFD was up and running. BFD should be supported on Cisco 3850 device with IOS 16.06.09 or 16.12.08 but a...
Hi,migrating from 2821 to 2921 cisco router, it's not possible configure "frame-relay traffic-shaping" and "no ip mroute-cache" in to serial interface.Any one know is these features are already active on 2921 router or how can I configure them ?Follo...
Hi,Customer VOIP network has a CUCM version 7.1.5.31900-3.Connecting some cisco 7965 (configuring IP address and TFTP server in static mode) to the network all VOIP tel have registered correctly, but some of these tel the menu appears in English vers...
Hi,one Cisco 6509 reports a continuing alerts for high temperature.Customer has about 15 6509 switches and only that reports temperature problem.This switch has been installed correctly in the Rack and the fans are not blocked from cables or other th...
I've read about the various documentations on which there are BFD examples with routing protocols like OSPF and/or BGP.We have no active routing protocols and direct traffic exclusively with static routes.
On the two C3548P there were the following s...
Many Thanks, the procedure with USB has been successful. However, I find it strange that in case of user / password loss it is necessary to reload the IOS-XR without the possibility of restoring the configuration through other less destructive ways.B...
