Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
does anyone know the OID to use so that I can use snmp to set my enable password remotely? I'd really not like to have to telnet into 168 devices to do this.Thanks, Jeff
Greetings.I'm trying to use snmpset commands to perform a tftp action whereby I download a copy of the router's config to my tftp server. I've created a linux shell script to do this, and it all works except for the last line where I kick off the tft...
Greetings.Scenario2611 router (12.2(15)T14 IP Plus) with NM-2V, one 2-port FXO and one 2-port FXS card on local LAN connecting to 2611XM running CCME v3.2 (12.3(11)T2 IP Voice), and CUE v1.1.2 voicemail.The problem is that inbound calls do not propag...
Greetings.I've got a 2611XM running 12.3(11T) IP- Voice with CUE v1.1.2 working great internally within the business, VM works on the internal network, and incoming calls go to the correct IP phones. We have three FXO lines active.The problem is that...
Platform: 2611XM 12.3(8)T5 IP-Voice code with CUE v1.1.2 NM.My issue is that incoming calls ring properly, and after 4 rings attempt to go to the CUE, but the call gets dropped as soon as CUE picks it up. This is a new CUE install, by the way. CUE de...
your changes got me _very_ close, close enough in fact that I saw what else I was doing wrong. The code below works perfectly to pull the running config. I had to change the 1.1.3 option to 4 so it'd pull the running config.--------------------------...
I finally found that the problem is indeed I need the M1 version card, thought that was what I had in the first place. I've got them ordered, should be here in a week or so.-Jeff
CUE looks at the calling number as the identifier for VM actions, and is B in your case. Have you considered something like a shared line between A and B, or possibly an overlay?-Jeff
This problem is caused by CUE recieving, as the called ID into CUE, a number which differs from your extension. If your extension is x2001, and the pilot number into CUE is x2099, then 2099 should recieve 2001 as the inbound number.Try this: on the r...
