About amalitol81

amalitol81 · 02-04-2020

Hi Team, I'm trying to print from a Host (Windows 10) located in a Wifi Subnet (internal) to a wired printer located in the internal network.It's happening with all the printers and hosts.- The wireless architecture use CAPWAP to communicate the WAP...

amalitol81 · 05-06-2019

Guys, I'm wondering if backups of entire nodes of Cisco ISE 2.4 could be enabled on a DR site using vmware Site Recovery Manager (SRM). I'm sure this is not possible but I haven't found any reference of this topic on Cisco documentation. Cisco ISE do...

amalitol81 · 05-02-2019

Guys, I just upload the Mobility Express image to my Cisco WAP 2802i, After complete the Wizard I can't connect the WAP, not even by Wifi or wired. Notice that I have not configured DHCP Server due to I pretend to use the WAP in a Standalone mode a...

amalitol81 · 04-23-2019

Guys, Few days ago our Primary ISP had an issue in one NIC of its Core Routers. Due to that we started receiving packet loss (50%) and VPN point-to-point tunnels bouncing. In our environment the solution was shutdown MANUALLY the interface (which is...

amalitol81 · 04-02-2019

Guys, I have checked and it seems the WLC model 3504 does not have a Web Authentication bundle to download.What can I do if I would like the customize my Web-auth page for Web users, Could I use others "Wireless Lan Controller Web Authentication Bund...

amalitol81 · 02-04-2020

Guys,It was a Windows 10 configuration issue. Hopefully everything is fine with the wifi network.Thank you all,

amalitol81 · 05-07-2019

Hi guys, I'm agree with some of the points, but there are two things here:1.- DRsite does not have internet access. Smart license wouldn't work.2.- We run an Emergency Test every year, in that case we isolate the DR site environment form our Main DC ...

amalitol81 · 05-06-2019

Guys, You have brought in very interesting points of view, but let me explain why I'm asking for this compatibility between Cisco ISE and vmware SRM. Here is the thing.We currently have 2 nodes PAM/PSN running in our network. The entire wired/wireles...

amalitol81 · 05-03-2019

Guys, I got it !!! Here is the thing.I want to have the DHCP externally just for "Wireless Users".I also want to provide statics IPs to the WLC and the WAP attached.When you do NOT configure an "INTERNAL DHCP Server" in the WLC first configuration w...

amalitol81 · 05-03-2019

I also want to add that the WAP converted into a WLC has the LED state ALTERNATING BETWEEN GREEN AND RED, which means "Discovery/join process in progress". Does anybody have an idea what is happening here ? thank you,

Member Since	‎10-13-2017 11:28 PM
Date Last Visited	‎02-05-2020 12:25 AM
Posts	51
Total Helpful Votes Received	5

User Statistics

User Activity

I cannot print from a Wireless subnet to a wired printer located in an Internal network

Cisco ISE 2.4 and vmware SRM COMPATIBILITY

Mobility Express wired0: started and stopped and wired0 emac2: link up

shutdown an interface/BGP session running due to a packet loss on a specific path using Cisco IP SLA/EMM or tcl

Wireless Lan Controller Web Authentication Bundle

Re: I cannot print from a Wireless subnet to a wired printer located in an Internal network

Re: Cisco ISE 2.4 and vmware SRM COMPATIBILITY

Re: Cisco ISE 2.4 and vmware SRM COMPATIBILITY

Re: Mobility Express wired0: started and stopped and wired0 emac2: link up

Re: Mobility Express wired0: started and stopped and wired0 emac2: link up