Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We're currently setting up to recover after all these rolling blackouts to recover an ASA 5510 to an ASA 5515. We've lost the 5510 but thankfully have a backup for it. It's taking everything on the 5515 but the nat routing which is important for rout...
Afternoon/Morning Community, I have a bit of an issue here with a 3800 Cisco AP that for some reason is only pulling about 40MBPS at max for anything connected to it. However our connection should be twice that at least. It's currently linked to a 25...
Morning/Evening everyone, Stupid question but is the Cisco 2504 Wireless Controller able to connect and manage a Catalyst 9100 AP? If not what's the highest gen model of AP's we can go with before running into compatibility issues? Right now we're lo...
Morning/Afternoon everyone, We've recently setup several Cisco Webex roomkits inside our offices. Each one can call each other just fine and they can join Webex meetings just fine but how do you join a Microsoft Teams meeting from the Tablet 10? I fo...
Afternoon everyone! Our company recently received this Cisco Quadcam unit with a Touch 10 tablet. We figured setup would be the same compared to the Cisco Webex Room Kit that we have at our other locations but it seems to be requesting on the camera ...
Ok and if I'm reading this right it should be:object network CAMERA-SERVER
host 10.120.0.50 <--- this is the INSIDE IP?
nat (Inside,Outside) static 23.23.23.23 <------ OUTSIDE IP?!access-list outside_access_in extended permit ip any host 10.120.0.50...
I'm pretty sure our other kits are room kit plus. All we had to do was plug them into our network and register them to our account to set them up. once the touch 10's had the 16 digit code and the camera tied to them there was no issues. The kits we ...
