Hey everyone! I need some help, i am new to using Cisco routers (as far as setting them up my self) so forgive me if this is something simple that i am over looking/not understanding. I have a cable internet from cox. They gave the the ip address below.... IP: 98.191.**.147  DG: 98.191.**.129 SNM 255.255.255.224 the ip address is the ip address that will connect the router to there modem.  On the lan side i have the following Ip address 10.0.4.1 DG 10.0.4.254 SNM 255.255.255.0 What i need to do is take 10.0.4 network and tell it the inter net is at  the 90.191 network address and connect to the internet that way.   i have been watching some youtube videos on how to do this but there is something im missing and i cant figure it out. If some one could help me shed some light on this i would greatly appreciate the help!!!! ... View more

I have two networks. 10.22.227.X the 227 network has the internet connection on it, I also have 10.22.226.X Network as of right now this network has no internet. You can see the current configuration file here http://jpst.it/yTur As of right now i can not communicate between the two networks. What i mean by this is... I can not access files off my computer on the 227 net work from the 226 network and visa-versa. I am using Cisco packet tracer (that's where i got my configuration file from above.) and the network work great! But when i copy it to my router it doesn't work!!!! Can anyone help my out! I have been trying for weeks to make this work. ... View more

Here is the setup I have 2 networks.  1st one (this one is our old one and it is working great.) ip address 10.22.227.X subnet mask 255.255.255.0 DFG 10.22.227.254 2nd one (this is our new network that is not working right) ip address 10.22.226.X subnet mask 255.255.255.0 DFG 10.22.226.254   I can ping 10.22.227.131 from the 226 network but i can not ping 10.22.226.66 from the 227 network. (226.66 is my laptop 227.131 is my pc) I can see the files on the 227 computer seams as thought i have directional network.... I also have no internet on the 226 network.    Here is the running config file from the router that connects the 226 and the 227 network together.  Router#show running-conf Building configuration... Current configuration : 894 bytes ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! enable secret 5 $1$ngyI$dZN2sb5gHUYC2A37wLRQM1 enable password united2315 ! no aaa new-model ! resource policy ! mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ip subnet-zero ip cef ! ! ! ! ! ! ! ! interface FastEthernet0/0  description 0/0 10.22.227.254  ip address 10.22.227.253 255.255.255.0  duplex auto  speed auto ! interface FastEthernet0/1  description 0/1 10.22.226.254  ip address 10.22.226.254 255.255.255.0  duplex auto  speed auto ! no ip classless ip route 10.22.226.0 255.255.255.0 10.22.227.254 ip route 10.22.227.0 255.255.255.0 10.22.227.254 ! no ip http server ! ! control-plane ! ! line con 0 line aux 0 line vty 0  password cisco  login line vty 1 4  login ! end     The 227 network is managed by another company  they have provided me with this info.....   ip route 8.8.4.4 255.255.255.255 10.22.227.253 name TEST-TO-CLIENT-ROUTER       <=-- Added a test route  ip route 10.22.226.0 255.255.255.0 10.22.227.253 name CLIENT-NETWORK          <=-- Added a route to the clients device  s1.pryor# s1.pryor#ping 10.22.227.253 <=-- I can Ping to the Clients device    Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.22.227.253, timeout is 2 seconds: !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 1/4/9 ms s1.pryor# s1.pryor#sho ip arp 10.22.227.253 Protocol  Address          Age (min)  Hardware Addr   Type   Interface Internet  10.22.227.253           1   0023.33e8.5c96  ARPA   Vlan1                                     <=-- Got an ARP and MAC address for the Clients device  s1.pryor#     s1.pryor#ping 8.8.4.4 <=-- Can not ping pass the Clients Device    Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 8.8.4.4, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) s1.pryor-chv.robertsautoctr   ================================ The routes in place I was able to Ping to the clients device but not pass it  They will re-configure their router and call us back Our routes in place       What am i doing wrong that i dont have internet and local network? they told me they have routed the internet over to our 226 network all ready as well... See screen show for network setup ... View more

Hey guys i need some help! I am trying to set up my first switch. I am using the catalyst 2950 for learning on.  The network im on right now (the one with internet) has the following settings.  10.22.227.??? 255.255.255.0 10.28.43.254 The one i am learning on i connect to it by going to 192.168.0.1 this will allow me into it using the Cisco Network Assistant. I have a laptop on port 1 using Vlan1 and i have Desktop on port 24 with vlan 1 and i have a cable from our 10.22.227 network pluged into port 23 I am able to see the computers and i can share files on it. What i dont understand being a noob is why i dont have any internet on ether computer.  I have setup up port 23 as a switch.    It seams like to me i would have to give the switch a ip address a subnet mask a default gatway and a dns of the 10.22.227 network on port 23.   Can some one throw some light on the subject and point me in a good direction? ... View more