Good Day All, I have a 3802 AP running 8.3.143 that will not join a 5508 controller with 8.5.171. Unable to join controller "root certificate is not present" error. Partial logs below Any tips, please? thanks in advance Regards Amanda CAPWAP S...
Good Day, We are in a process of moving from ACS 5.8 to ISE 2.7.We have run the migration tool and it appears to have worked without issue. I checked the policy on the ISE server and we now have a policy set containing 2 elements. Rule 1Condition Net...
Good Day, We have an environment that has multiple users who attach to network with Cisco Anyconnect VPN and ASA Firewalls. We are using Cisco ACS server at the moment ; but are looking to migrate to the ISE product in the coming weeks. The anycon...
Good Day,I have a 2600 router that I am running NAT on. (well PAT actually )We access an Oracle server running on a SUN box on another network whose IP address space conflicts with our own. Thus, we need to run NAT between the two.lWe are translat...
Good Day,I am having troubles with NNM recognizing traps form cisco routers.I have installed the following mibs already.snmpv2-smisnmpv2-tcsmpv2-mibrfc1213IF-mib rfc 2863Cisco-If mibCisco-smicisco-products-mibcisco-tc-mibI think that i might need s...
Thanks for the reply Scott. Is this a new install or do you have existing ap's that are joined? This is an existing install. We are building the 9800 CL controllers now. I am reticent to make changes on the single 5508 controller, but once I have ...
Thank you Leo, I appreciate the help. Would you happen to know if there is a way that I can load the software directly onto the access-point itself? regards Amanda
Thank you very much mate.I will have to wait until the weekend to try this out; but it really sounds like you have fixed this up.I will be in touch...regardsamanda
Good Day Mate,What routing protocol are you using?Most 1750s are deployed at a remote site.maybe you could use a static route.Are you using VPN?regardsamanda
