Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,Several weeks ago, we upgraded from ISE 2.6 to 3.1p4.Over the weekend (Sunday and Monday at approx. 1:10am) we got hundreds of emailed alerts like this:Configuration Changed: Admin=internal-feed-user; Object Type=OUI; Object Name=00:01:C8Descr...
I'm trying to get the On-Prem server to send a failed syncronisation syslog message to our customer monitoring platform.It is important for us (as a monitoring facility) to know when the on-Prem server fails to syncronise to the Cisco SSM Licensing p...
Happy new year to all! I'm setting this up from new and am having 3 related Issues.The main issue is that I get an error "SSO service: Unable to reach Cisco".This happens when I try and "Approve/submit" a new account that i created within the Workspa...
Hi all.I am trying to setup an ASA5510 to protect our new Network Lab, that I'm building for work.However, I started running into issues and have tried to reduce the configuration to allow everything to everything.I basically want it to be a router, ...
Should be a simple act, but no matter what I do, I can't ping from my ASA5510 to VLAN1 of the Router. ASA5510 Interface:interface Ethernet0/0speed 100duplex fullnameif Outside-Internetsecurity-level 0ip address 122.56.33.108 255.255.255.248 Router I...
On a 3850 Switch, I had the same problem deleting the trunk mode from a mixed "access" mode and "trunk" mode. What you did worked for me too.Before:interface GigabitEthernet1/0/4description Unusedswitchport access vlan 999switchport trunk allowed vla...
HiI'm running ISE 3.1 p5Niether the "Renew Registration" nor the "refresh" options worked for me.Instead, I had to create a new token (in our Smart Software Licensing portal) and paste this into the ISE Licensing page:On the ISE PAN, Navigate to Admi...
We have been on 3.1 P5 for about 6 months with no issues. However, we started getting this error a few weeks ago when we installed DNAC. It's something to do with the snmp requests to ISE. Not sure what yet. Sounds like a job for Cisco TAC.
Hi There,We are now at version 3.1 Patch 5 and are still getting this alert.I have a few a few days to spare so I'll log a case with TAC and post the results to here.
