Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am using PIX to protect my 3 VLANs. PIX is connected to the trunk ports on the switch. E0 has 253, 556, 557 VLANs253=253.12556=156.254557=157.254E1 has 52, 156, 15752=52.1156=192.168.156.1157=192.168.157.1IPs assigned to VLANs on the router ar...
I am trying to implement certificate (on USB token) based VPN to my PIX. Because of our existing infrstructure we would like to use Novell Certificate server. As far as I know, Novell does not support SCEP (or does it?). It supports manual certificat...
Is it possible to have more than 2 IP interfaces within the same VLAN, on the same device?ex.int vlan 133ip addr xxxxip addr xxxx secip addr xxxx ...Second question is regarding VLANs:What kind of VLAN is 133.1 for exaple. Will it be additinal Vlan ...
Where can I donwload latest non-vulnerable PIX OS? I have a CCO account, but only options to download are plain 6.3.3 or 6.3.2 or 6.3.1.However, the latest TCP vulnerability issue recommends upgrading to:6.3.3.132, 6.2.3.109, or 6.1.5.103 Where can ...
Is there any way to remotely upload the new .bin image to 2500 without bringing the network down?What I want to do is to upload the image and set the boot variables during normal hours and then have NOC people just restart the router at 3 a.m. Sunday...
Hi Brian,First I am not sure when you say two WAN connections, do you meen two different paths,interfaces to the same ISP, or two different routers to the same ISP. Most likely second one.If so, in reality you have two choices.1. No need for BGP. ...
OK, I resolved this one as well. I had an old router somewhere on the network advertising 52.1 IP and change the routes. Some some packets would go as they should, some packets would get lost.All good now.However, I've got a new question regarding ...
Thanks for the help. I got it to work. However, now I have a different problem. The connection is up for about 1-2 hours and then stops. There is still about half of the RAM free and CPU utilization is about 12%. ICMP traffic continues to flow, ...
Thanks for the help. I got it to work. However, now I have a different problem. The connection is up for about 1-2 hours and then stops. There is still about half of the RAM free and CPU utilization is about 12%. ICMP traffic continues to flow, ...
Thanks gfullage,My question is why do I have to have int253 as well? Is it because int556 and int557 are logical interfaces? The reason I am asking is because I do not want to send the 156 and 157 traffic out of PIX to VLAN 253. My Vlan mapping is...
