Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, My default class-default is not using the traffic shaping and queue length that i have configured. I configured a parent policy map (Out) and a child policy map called (MPLS_Out). The parent policy map provides traffic shaping for my MPLS ci...
Hello, we are running UCCX Premium and we have 3 users out of 7 users in a call queue that are experiencing issues. A phone call comes in on an 800 number and rolls to agent, that agent answers the call, disconnect the call when complete and there p...
I am trying to determine which ports are combo ports. The model is WS-C3560CX-8XPD-S.Which ports are combo ports. Here is the show ip int brief GigabitEthernet1/0/1GigabitEthernet1/0/2GigabitEthernet1/0/3GigabitEthernet1/0/4GigabitEthernet1/0/5Gig...
Hello,
Hopefully, its ok to post this in this section! I need to be able to remotely access 3 appliances at a remote data center. Currently, I have an Open Gear MX7004 modem dial in appliance. Unfortunately, I am having issues with my 1MB analog...
When I do a shop policy-map int gi0/1. The default queue is not correct. My queue length is incorrect. Class-map: class-default (match-any)178055 packets, 89889026 bytes5 minute offered rate 1425000 bps, drop rate 7000 bpsMatch: anyQueueingqueue li...
the switch show ip int brief has the following output GigabitEthernet1/0/1GigabitEthernet1/0/2GigabitEthernet1/0/3GigabitEthernet1/0/4GigabitEthernet1/0/5GigabitEthernet1/0/6GigabitEthernet1/0/7GigabitEthernet1/0/8Te1/0/7Te1/0/8Te1/0/1Te1/0/2
Hello Everyone, thank you for your responses!!! I figured out the issue. I had not enabled the PBR feature in the VDC.
Once enabled (feature pbr), the policy map command under the interface worked!
Thank you,
Sharonda
