Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is "ip flow egress" supported on this platform? Is it possible to collect bidir stats if Netflow configured as follows:interface vlan ... ip flow ingress ip flow egress
Does anybody knows what this feature was designed for?username newuser attributesmemberof DevTest,managementIs it another form of Group Lock feature?username newuser attributesgroup-lock <tunnel-group1>Thx.
On the ftp://ftp-sj.cisco.com/pub/mibs/supportlists/wsc6000/wsc6000-supportlist-ios.html I see that lot of MIBs are supported by the Cat65k, for example SMON-MIB, HC-RMON-MIB, RMON-MIB, RMON2-MIB, IF-MIB, etc. Which of them are supported by the Cat65...
Hi!I'm testing Clean Access in In-band VGW mode with clients that are *not* directly connected to the CAS (i.e. L3-adj. mode).Can anybody tell me do I need to configure static routes on the CAS for user subnets? It seems that the CAS always send traf...
Is it possible to create a SNMPv3 user which can only be used for traps (SNMP GET requests will not be allowed from the same NMS)?It seems that creating "notify group" also allows reads:snmp-server group trapgroup v3 auth notify v1defaultshow snmp gr...
Answering my own question: "which interface, trusted or untrusted, the CAS will use to communicate with clients in case it has the same IP on the untrusted and trusted interfaces and no other routes configured, except the default route?".The Answer: ...
Thanks a lot for the replay, however it doesn't help.> The traffic destine for client will have to come in the trusted and out the untrusted. The return traffic has to come in the untrusted and out the trusted. This is only correct from bridging poin...
From the doc:The VPN Concentrator implementation of NAT-T supports IPSec peers behind a single NAT/PAT device as follows: •One Microsoft L2TP/IPSec client. •One LAN-to-LAN connection. •Either a LAN-to-LAN connection or multiple remote access cl...
> All other subnets will need a static route1. Why does the CAS need a static route if it already has default route via the trusted interface ???2. In case I configure the static route should I specify the trusted interface or untrusted interface in ...
