Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have some Cisco switches that running Catos.The VTP configuration was configured with password protection. now I could not add a new switch to join the VTP domain due to lost of password, and I don't want to change the existing VTP setup. Is there ...
I have a router runing both RIP V2and EIGRP routing processes, and redistribute routes from RIP V2 to EIGRP.I have network: 200.200.0.0/16 and 200.200.0.0/24 and 200.200.0.0/30 in RIP V2 table. I would like to redistribute this routes over to EIGRP. ...
I have a brand new cat 3560 switch, and we connect PCs( running windows XP and windows 2000) into switch, we notice that XP manchine could connect to switch, but windows 2000 machine with Intel NIC could not establish connection with switch, we try t...
I have web server behind the PIX firewall, this web server only has one NIC but assigned with multiple with two IP address 192.168.1.13 and 10.10.0.200, We have two Registered IP address 12.111.23.22 and 12.111.23.31 NAT configured on PIX as followin...
I have disscussion with my co-worker to decide what we should use to control and modify routing information that is exchanged between routing domains. both neighbor prefix-list and neigbor route-map serve the the purpose.and both could work together ...
In real secure environment, ex. the extranet connection between banks, encryption is still required even arcoss private line, so that security risk of evasdropping or traffic tapping will be prevented. Ipsec is layer 3 encryption protcol, could be ru...
Yes, you can single Ethernet interfac to achieve this.I have same configuration scenario at our production network. we also put GRE tunnel on top of IPSec.
