Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,the Cisco download link for the SPA400 USB module - apparently spa400vm.zip, no longer works. Is there a new location, or can someone reply back with a link to where else I can find this image for the USB stick?Thanks. Russ.
Hello,We have recently had some issues where MLS seems to stop working. The symptoms came about when a next hop firewall had its hardware swapped (downstream). We cleared CAM tables on the local switch - however we expected the MSFC (and MLS) to deal...
Hello ... my question is similar to one posted recently. But I still cannot understand the reason.Our customer has a CSS x 2 with SCAs x 2 in a one-arm Proxy (transparent) operation.Currently we have 3 default routes as suggested in CCO.1 for upstrea...
Hi,We have a pair of CSS 11050s configured in a redundant pair. We have a content service defined on both CSS's. They are configured for Layer 5 balancing, with Sticky timout configured at Layer 4 for the respective service (I don't know if this is c...
Hi,We implement Private VLANS at our site, with community and using promiscuousports with Firewalls attached to link them together.Can anyone advise whether it is possible for a broadcast or multicast topass from one community vlan to another, or fro...
I abandoned my effort to find the spa400vm files - as the spa400 started rebooting every 30 seconds, then after I reset it, even the http configuration page was inaccessible. dead box! Now am just setting up a grandstream replacement.
Can I also add in relation to the above - thereare no error messages on either box.Any suggestion of a possible cause, or any show / debug commands to look at on the CSS would be very welcome.