Does anyone have a good link with example configs?I've tried to mimic this linkhttp://www.cisco.com/en/US/tech/tk436/tk428/technologies_configuration_example09186a0080242aa8.shtmlWith no success.Any help would be appreciated.-bryan
Is it possible within Unity 4.0(x) to change which Exchange server it points to without having to reinstall Unity from scratch? If so, where could I find documentation/guides?Thanks
Some key differences:3750 offers distributed CEF (like) functionality where-by you can do a CEF lookup at each switch in the stack.4500 offers a centralized packet forwarding architecture, which is the fastest/lowest-latency in the market. The tot...
Platform-dependent, you get Static routes, RIP, and EIGRP-Stub in the IP Base (formerly SMI) at no cost.Net-result, you should have inter-vlan routing.Dumb question: Did you type "ip routing" in global config?-b
For whatever it's worth, I wouldn't count on the concept of GD being around forever. It's a legacy hangover, that is less relevant than it previously had been.-b
It is actually CEF that is selecting which paths not RIP, as RIP will put all 8 paths in the RIB. It is then up to CEF to put those routes in the FIB based on its determination which paths to select.Check this link outhttp://www.cisco.com/en/US/prod...
Have you tried to assign unique HSRP group numbers to the 26 different groups you need? 32 HSRP groups is an HW limitation of the 3750 with no workaround available, unlike the 3550 where you could get creative with clumping groups of vlans and re u...