Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Maybe someone can help me here.I have a 2811 router with the 16 port POE etherswitch that has the gig port.I appear to have the correct power supply as that was how it was ordered and I show 160 Watts available. Problem is, the fast ethernet ports ...
I have the following config and I can not get the client to pull an ip addresscrypto pki trustpoint dc-ho1 enrollment mode ra enrollment url http://10.10.20.2:80/certsrv/mscep/mscep.dll serial-number none fqdn HOEDTVPN.edt.net ip-address none passwor...
I need some help configuring QOS on a 6548 blade with sup720. I am a metroE subsriber on a port. I have a gig port speed with 100meg service. I have 25meg available for priority queue. I need to limit my aggregate output to 100meg. I need to mark pri...
I need some help configuring QOS on a 6548 blade with sup720. I am a metroE subsriber on a port. I have a gig port speed with 100meg service. I have 25meg available for priority queue. I need to limit my aggregate output to 100meg. I need to mark...
I configured my ASA to authenticate vpn client connections via an RSA server. The user is prompted for a username and passcode (pin plus number generated on fob). This works. I have been asked to have the user prompted for username, password and ...
That part number is on the order and it looks like the module receives power. I do not know how to tell if that module is actually installed in the router. The show power command is available and it does show 160 Watts of power available. I can plu...
quote "mls qos map policed-dscp normal 0 24 26 34 36 to 8 Excess traffic marked 0,CS3,AF31,AF41 or AF42 will be remarked to CS1 class-map match-all VOIP match ip dscp ef policy-map voice-policy class VOIP police 2500000 8000 exceed-action policed-dsc...
