About jugranneeraj1

jugranneeraj1 · 11-06-2023

Hi, I am running the POAP script on nexus switches but facing one issue that, POAP file downloaded successfully but unable to download the Image file from the Artifactory server.We have performed same operation multiple time it result was success. On...

jugranneeraj1 · 04-22-2015

Hi,I am getting Rx power low warning message in cisco WS-C2960X-48TD-L SWITCH. we are using same cisco SFP module at both end.SFP Module Details:PID: SFP-10G-SR Error MessagesApr 15 13:34:35.457: %SFF8472-5-THRESHOLD_VIOLATION: Te2/0/1: Rx power low...

jugranneeraj1 · 03-24-2015

Hi,We are using cisco CP-7821 IP phones but some IP phones are showing incorrect time. Need assistence for fix this issue.

jugranneeraj1 · 03-26-2015

Hi Aman,Thanks for your help, Problem has been resolved after factory reset. Activity:1> Downgrade the fw version from new to old2>factory resetNow all IP phones are showing correct date and time. Regards,Neeraj

jugranneeraj1 · 03-26-2015

Hi Aman,I have downgrade the FW version from sip78xx.10-2-1-12SR1-4.loads To sip78xx.10-1-1SR1-4.loads but the problem is still same. Neeraj

jugranneeraj1 · 03-24-2015

Hi Aman,As per your suggestion, I checked the firmware version of IP phones and i found that some IP phones which are showing correct timing having firmware versionsip78xx.10-1-1SR1-4.loadsAnd some which are showing incorrect timing having firmware v...

jugranneeraj1 · 03-24-2015

Hi AaronThanks for your reply... Hours & Minuts both are out of sync....Current time is 06:11PM but some IP phones are showing 12:42PM.and I have already configured and assigned NTP references in CUCM. Neeraj

Member Since	‎03-24-2015 12:29 AM
Date Last Visited	‎01-31-2024 12:13 AM
Posts	7

User Statistics

User Activity

POAP Failed Error wrong ELF class ELFCLASS32

SFF8472-5-THRESHOLD_VIOLATION ISSUE IN WS-C2960X-48TD-L SWITCH

CP-7821 showing incorrect timeing

Hi Aman,Thanks for your help,

Hi Aman,I have downgrade the

Hi Aman,As per your

Hi AaronThanks for your reply