Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a remote building that has about 60 users. We are getting a layer 2 MPLS (opt-e-man) service point to point. I plan to have 2 network at the remote site 1 for data and 1 for voice. There are other vlans I need there for authorization as w...
I currently have 4 controllers with multiple vlans configure for one ssid. The vlans are group by building and each vlan is a /24 network. I have been asked to create one vlan per controller with a /21 network. I am worried about the size of this...
Here my problem I need to be able to limit my AD users to a 10min access to the WLAN. I see you can do this for guest accounts, but you have to manually enter a username and password. I would like the web authentication to use our ACS which is tied...
Ahmed,Can you explain how you resolved this issue. I have the same problem my vpn users can remote desktop to any inside pc, but users inside cant vpn to them. thanksSteve Chapman
yes currently we have 13,000 routes (Internet 2 sites) and they are talking about supporting I1 routes down the road so it would be a total of 176,000 routes. at what point on the asa processor and memory would I start to get concerned?
I currently have the peer to peer blocking set to drop so this stops client to client right? Does this block the broadcast or is there something else I need to configure like broadcast forwarding? Note: I am running version 6.0.182.0 layer 3 mode.t...
Weterry,Thanks for the ideas I got it to work !!! Here what I did. Under the WLAN ssid under security tab then AAA servers I selected order used for auth and set it to radius. Then under Advanced tab I did Allow AAA override enable and set the ses...
