Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,Im running a ASA5520 with 7.0(6).In my setup i have all my 8 subinterfaces /dmz's (incl. outside) running same sec.level because i just want to control security with my ACLs and it works just fine, no problem there + dont want lots of statics and ...
Hey,Whats the big diff. between ASA versions ? 7.0/7.1 and 7.2 ? I can see that asa706-k8.bin is newer then eg asa721-k8.bin ? is 7.2.x like T-version ? Martin DK
Hi,quick question and probably an easy one :How come i cant delete my ACL ? i can delete an ACE but not the ACL ---ciscoasa(config)# access-list 110 permit ip any anyciscoasa(config)# access-list 110 permit tcp any any eq 25ciscoasa(config)# access-l...
Im having problem reading if im running EuroDOCSIS or just DOCSIS om my uBR7114E CMTS's. Want to know the max bw on my downstream. It all looks like im running Edocsis : Cable1/0 Downstream is up Frequency 135.5000 MHz, Channel Width 8 MHz, 64-QAM, ...
Is it possible to make my pix 501, running newst 6.x software make and handle a vpn tunnel to out 3750 crypto vpn router ? Found this doc :http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00800ab518.shtmlbu...
hmmm ... there are some messages that could be usefull but dont know if there are the right one :http://www.cisco.com/univercd/cc/td/doc/product/multisec/asa_sw/v_70/syslog/saslapa.htmelse try to kill your site-to-site vpn and see that the log says ...
