Hi, I need to know if there is any way to check is dscp rewrite is enabled or disabled in Layer 2 and Layer 3 devices. I am using CAT9500, Cat 4500, ME3600 and ASR920 devices. I am trying show mls qos command, same as in Cat3750, but it is not worki...
Hi, I have a ASR9010 Router with a single RSP (A9K-RSP880-LT-TR). Up to some time ago when this router was connected with only two Upstream providers, everything was OK and when one of providers went down, the traffic smoothly passed to the other one...
Hi, I have a Cisco ASR 9010 Router and I want to configure BGP BlackHole.I want to know about the syntax that is needed to be applied in order to do this, because I am having some issues regarding BH application in IOS XR.Lets say that I want to appl...
Hi, I have a Cisco ASR 9010 running IOS XR 6.4.2.Since two weeks ago it has generated the following alarms every day: Jan 31 19:19:15.158 GMT+2: 42380: RP/0/RSP0/CPU0:Jan 31 19:19:15.158 GMT+2: pfm_node_rp[138]: %PLATFORM-DIAGS-3-PUNT_FABRIC_DATA_PAT...
Hi, I have a Cisco ASR9010 Router running only with one RSP card.Now I want to add another one to have a redundant system, but I want to know what happens if the card that I will add has a newer IOS XR version compared with existing one.Do you have a...
Hi all,Thank you for your replies.I have a standard configuration for BGP, the same way as I have configured my other routers, where I have no issues. This is the configuration used for all three neighbours:neighbor X.X.X.Xremote-as 1299description *...
Hi Marce, Thanks for your reply.As far as I can understand, i think that they are not compatible, because none of my actual Line Cards is part of that table.Why do you think they are compatible? Thanks
Hi Marce, Thanks for your reply. My IOS is Cisco IOS XR Software, Version 5.1.3[Default].Is it considered an old version and if so, what new version do i need? Thanks,Aridy
