Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
This seems like it should be simple, so I'm probably missing something basic.ISR 4351 Router running 17.6 firmware. We're using auto register to connect 8851 phones. Everything is fine except for one little problem. The preferred codec keeps showing ...
I'm auto-registering SIP phones to CME. There hasn't been any problem getting phones to register but the name on the phone is always AUTO-REG. I tried adding a Name and Label to the voice register dn, but it didn't help. Is there a way to force it to...
When I boot up the phone it gets it's ipv6 address then I see this. 009593: Jan 15 14:43:07.308: TFTP: Looking for CTLSEPC0626B639254.tlv009594: Jan 15 14:43:07.429: TFTP: Looking for ITLSEPC0626B639254.tlv009595: Jan 15 14:43:07.551: TFTP: Looking f...
This seems like it should be fairly straight forward. CUCM 11.5 using auto-register for phones so we can just plug them in and go. That part works fine, they download firmware, get a DN and are usable. I'm looking for a way to use auto-register to as...
We're running a 4351 with a E160 blade with CUCM 11.5. I've noticed that phones on the voice vlan can't talk to the UCM. Should CUCM be able to work on the same VLAN as the phones? The phones can talk to the router. CUCM can talk to the router. But C...
Unfortunately neither the voice register global nor the autoregister under the voice register global have an entry for codec or voice codec. I hoped template might have something for that but looking in voice register template 1 there isn’t anything ...
I use a voice codec for the Dial-Peers as follows.Voice class codec 1Codec preference 1 g729r8I've not found anyplace to put a voice codec in the register pool or a template for the register pool. The phones connect to a switch that connects to the r...
In case this helps someone with SCCP. Running the create cnf command in telephony services fixed the missing information in the XMLDefault.cnf.xml and the phone registered.
It looks like that phone had been previously registered with a ccm. Erased the ITL and now the phone successfully downloads the XMLDefault.cnf.xml file. Downside is it just keeps doing that over and over. But hey, progressing bit by bit. Edit: So I n...
I'm getting more curious. The configuration has worked previously on 29XX routers, but this is a 4351 so there might be some changes.Show telephony-service tftp-bindings shows 'tftp-server system:/its/vrf1/XMLDefault.cnf.xml alias XMLDefault.cnf.xml....
