Does the 6296 Support Netflow?   Can I send netflow information to Prime Infrastructure from this device?   What NX-OS do I need to be running?   ... View more

Is it ok to use the 10GB-T ports in a 3750X module for server and/or Storage Array connectivity?  What are the downsides of doing this vs handing off to a 10GBT switch like a Nexus instead...  (port buffer, latency etc) ... View more

Is there a feature matrix that compares functionality of the Wireless Controllers, ISE, MSE, Prime etc? There is some overlap on these devices and it would be helpful to know what each one does from a feature perspecitve in one place.  So if you want location you go with MSE, you want guest services you go with ISE etc... You can do guest services in the controller, but ISE has more features etc... ... View more

I have a client that wants to limit bandwidth for his users to specific sites.  Can you do that with the Ironport S-Series web security appliance?  How granular is the control? ... View more

We’re currently (and have been) able to log VPN access through our firewall for our IPSEC clients via RADIUS in MS InternetAuthentication Service (IAS) on our domain controller.  However, moving forward with LDAP authentication, we need a replacement for this functionality.  We need to log account, IP address, start and stop times.  I’ve done a quick Internet search of ASA Logging (VPN) without success.  I’ve also tried to find a place to configure this in ASDM on theASA without success.  Is this possible without 3 rd partysoftware via ASDM?  If not, what scripting 3 rd party tools would you recommend? ... View more

Can the power draw on a 7945 or 65 be reduced below 12W in any way?  Like if you used 100MB only and dimmed the screen somehow? ... View more

I have a client that has an HP infrastrucutre (I know... losers) but I am integrating a new Cisco core switch (3560X with 1GB module) and I'm curious if they can use their existing HP SFP - Part #: J4858B Will I be able to use this SFP in the Cisco switch to connect fiber to their HP?   Are all SFP's pretty  much considered the same?   (this would be a GLC-SX-MM evuivalent..) ... View more

I'd like to convert my XenPak ports in a 4 port 6509 blade to SFP+ Will the ONeX converter work for this purpose?   Or is it only for X2's?   Is there really a big difference? Converter part is CVR-X2-SFP10G= Blade part is WS-X6704-10GE If the converter works... will a 10M SFP cable work with this converter?  (in the data sheet it only lists up to 5M but it could be old... SFP-H10GB-ACU10M Thanks! ... View more

Is CUBE supported on the 3725 platforma and if so, what part numbers are required to upgrade the router to support it?  Parts like CUBE licensing, PVDM's and needed DRAM/Flash. ... View more

Is a straight ATM T1 an option for the 2900?  I saw in a data sheet that the 2900s support it... how do I accomplish this?  IN the 2800's you could use a VWIC and an AIM card.... ... View more

Does any one know off hand whether the NM-1GE (currently in a 3745) is compatible with a new 3945.  I can't for the life of me find a compatibility matrix on this module... ... View more

I have a ASA5510 which should have 4 10/100 ports and a 10/100 management port. I am unable to access or configure e0/3. Is this a limitation of the Base license? Or a limitation of 7.0(8)??? Here is the sh ver... it doesn't make much sense interms of supported VLAN's or VPN peers either. Maximum Physical Interfaces : 4 Maximum VLANs : 10 Inside Hosts : Unlimited Failover : Disabled VPN-DES : Enabled VPN-3DES-AES : Enabled Security Contexts : 0 GTP/GPRS : Disabled VPN Peers : 50 ... View more