Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I am trying to bring up an lacp port-channel on a Nexus 7000 ( eventually using vpc) and it wouldn't come up. This work when mode is set to on but once the word active is used, the physical ports goes into suspended state and the port-channel remains...
Does anyone knows how to recover or change the admin password for ciscoworks. The default was changed during installation but the installer has now forgotten the new password. Server is solaris.
I had a session timeout of my GUI while configuring the concentrator to use AAA for management but before setting up my admin user with privilege level 15(it is currently set to none). Now I am unable to login to the concentrator.Console login with c...
how do I add service = junos-exec to a user profile using ACS for windows. This is straight forward in the Unix ver (ACS 2.3.6) through the CLI but does not work within the Windows version. I need to enable authentication of the Juniper routers using...
Is it possible (and if yes how) to configure the ACS windows ver 3.1 to force the user to change their enable password. Users are required to use different password when going into enable mode. They can currently change the original password.
Thanks Ganesh,I am aware of that link, the configuration is exactly as posted but something is preventing the channel from coming up. I have checked all the configurable parameters and they are the same. At this stage I don't know what else to check....
I have configured the 3000 to use TACACS for admin but am presently unable to login to the concentrator. One thing I failed to do was set the privilege level for the admin user. I can see in the log that connectivity was established with the ACS but ...
