Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi experts,I am consolidating a LAN architecture as you can see in the topology attached. I have applied all the required functionnalities as HSRP, M-Spanning Tree, L2 Etherchannel, Trunks and so on. My big problem is that traffic from the Firewall c...
Hi experts,i have designed high availability architecture (see attached file). Normally, the final implementation woulh let people int the remote network to access serveur in the access layer and access layer servers should be able to send packets to...
Hi all, I cannot display topologies services (network map) from my client connected to the CiscoWorks server. It still possible from the server itself. When trying with the PC client, the following message appears : ANI-DBServer is not running, check...
Jon,Thanks for your reply. As per your first request, please find attached the detailed diagram layout with ip and the configuration file for each device. the config file also include tests results from firewall and from PC test. iam sure, you wil...
Hi Jon,the cat3560 is not really a core switch... i have configured L3 (routed port) between the cat 3560 and the distribution switches and setup hsrp to have unique gateway for my firewall. dist 1----------int gi1/1ip add 10.10.10.1 255.255.255.0s...
In fact, my case is related to 4 four main sites, each with at least 4 remotes sites connected to it. My design is :- UCM + Unity + gateway + gatekeeper for main site- CCME on remote sites- gateways, CCME and gatekeeper are connected to both PSTN and...
