Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dear all,We did upgrade for all of our VOIP Enviroment as follows:Call Manager from 5 -> 7Unity from 5->7Presense 6->7and everything is working fine, except the newer version of Cisco unified personal communicator 7 is not able to connect to the pre...
Dear All,I have CUCM 5.1, and Presence(6), I am using CUPC 1.2(3) and i have strange problem. Some users are able to login successfly, but others have stuck in offline status and they are not able to change their status and i attached the show serv...
Dear all,I have WiSM WLAN Service Module installed on 6509 core switch, everything was working fine, suddenly the first controller became unavailable and showing the following output CoreSwitch# <strong>show wism mod 4 controller 1 status</strong> Wi...
We have clustered CCM 5.1, and sometime some lines become unavailable and give the called fast busy tone. The only bad solution I found is to delete the line from the phone and return it back!!! Is there a good solution for that case???Please advice.
Dear all,I have CUCM6 and everything is working fine except outgoing call.There is at least 15-18 seconds delay when the CUCM place the call to the Voice gateway!!Is there any parameter to alter this time or this is an error??
Dear htluo ,I did as you mentioned, i got better result than before!! ,CUPC keeps connecting and disconnecting with the CUPS!!!!!At least we saw conncected status
Yes I am able to ping:H:\>ping cups.awqaf.gov.kwPinging cups.awqaf.gov.kw [10.21.0.102] with 32 bytes of data:Reply from 10.21.0.102: bytes=32 time<1ms TTL=63Reply from 10.21.0.102: bytes=32 time<1ms TTL=63Reply from 10.21.0.102: bytes=32 time<1ms TT...
Dear htluo ,Thanks a lot for your help; I did what you said to change the proxy domain, but unfortunately still not working. I attached the screenshot.
